Saturday, 4 June 2011

Repair of the Crack/Speedball

Finally got around to removing the board that was damaged due to my own fault. See the photos below. You can see a very small hole in the small blue resistor 237R. It measures over 4k now. One of the diodes also do not bias up at 1.4V. All parts removed and the through holes cleaned. I accidentally ordered the 2N2907 and 2N2222, rather than the "A" versions. Now, I have ordered the correct ones, and also a replacement 237R resistor. Should all arrive by next weekend, in time for re-installation. 

No comments:

Post a Comment